序号 |
论文名称 |
期刊名称 |
卷期页 |
收录 类型 |
期刊 分区 |
影响 因子 |
奖励 金额（元） |
作者（全部） |
完成 情况 |
奖励作者学号姓名 |
1 |
An integrated optimization for laminate design and manufacturing of a CFRP wheel hub based on structural performance |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2018,57:2309-2321 |
SCI |
2区 |
3.269 |
2000 |
F Lei，R Qiu，Y Bai，C Yuan |
非独立完成（第一完成人） |
邱瑞斌 |
2 |
The effect of air/fuel composition on the HC emissions for a twin-spark motorcycle gasoline engine: a wide condition range study |
Chemical Engineering Journal |
2019; 355: 170-180. |
SCI |
1区 |
6.735 |
2000 |
Xiaoqiang Liu, Banglin Deng, Jianqin Fu, Zhengxin Xu, Jingping Liu,Meng Li, Qing Li, Zhengwei Ma, Renhua Feng |
非独立完成（第一完成人） |
B100200041（刘小强） |
3 |
Analysis and optimization of clutch judder based on a hybrid uncertain model with random and interval variables |
Engineering optimization |
2018,50（11）：1894-1913 |
SCI |
3区 |
1.908 |
1000 |
Y. D. Hao, Z. C. He, G. Y. Li, Eric Li, Y. Y. Huang & C. C. Lian |
非独立完成(第一完成人) |
B130200046（郝耀东） |
4 |
Uncertainty analysis and optimization of automotive driveline torsional vibration with a driveline and rear axle coupled model |
Engineering optimization |
2018,50（11）：1871-1893 |
SCI |
3区 |
1.908 |
1000 |
Y. D. Hao, Z. C. He, G. Y. Li, Eric Li & Y. Y. Huang |
非独立完成(第一完成人) |
B130200046（郝耀东） |
5 |
An isogeometric independent coefficients IGA-IC reduced order method for accurate and efficient transient nonlinear heat conduction analysis |
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS |
2018,73(10):667-684 |
SCI |
3区 |
2.271 |
1500 |
Chensen Ding, Xiangyang Cui, Rohit R. Deokar, Guangyao Li, Yong Cai & Kumar K. Tamma |
非独立完成（第一完成人） |
B1302S0024（丁陈森） |
6 |
Topology optimization of periodic lattice structures taking into account strain gradient |
Computers & Structures |
2018，210： 28–40 |
SCI |
2区 |
3.362 |
2000 |
Daicong Da, Julien Yvonnet, Liang Xia, Minh Vuong Le, Guangyao Li |
非独立完成（第一完成人） |
B1302Z0001（达代聪） |
7 |
Design of material microstructures for maximum effective elastic modulus and macrostructures |
ENGINEERING COMPUTATIONS |
2018,35(2):622-640 |
SCI |
4区 |
1.338 |
1000 |
Da, DC; Cui, XY;Long, K; Huang,GX; Li, GY |
非独立完成（第一完成人） |
B1302Z0001（达代聪） |
8 |
Topology optimization of particle-matrix composites for optimal fracture resistance taking into account interfacial damage |
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING |
2018，115 （5）: 604-626 |
SCI |
1区 |
2.794 |
1500 |
Daicong Da， Julien Yvonnet， Liang Xia， Guangyao Li |
非独立完成人（第一完成人） |
B1302Z0001（达代聪） |
9 |
Numerical optimization of natural gas and diesel dual-fuel combustion for a heavy-duty engine operated at a medium load |
INTERNATIONAL JOURNAL OF ENGINE RESEARCH |
2018,19(6):682-696 |
SCI |
3区 |
2.72 |
1500 |
ZhenkuoWu, Christopher J Rutland, Zhiyu Han |
非独立完成（第一完成人） |
B140200080（吴振阔） |
10 |
Numerical Investigation on Mixture Formation in a Turbocharged Port-Injection Natural Gas Engine Using Multiple Cycle Simulation |
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME |
2018,140: 051704 |
SCI |
4区 |
1.896 |
1000 |
ZhenkuoWu, Zhiyu Han |
非独立完成（第一完成人） |
B140200080（吴振阔） |
11 |
An efficient epistemic uncertainty analysis method for structural-acoustic problem based on evidence theory |
NOISE CONTROL ENGINEERING JOURNAL |
2018,66（2）：117-130 |
SCI |
四区 |
0.613 |
500 |
Chen, Ning，Yin, Shengwen，Yu, Dejie，Liu, Zuojun，Xia, Baizhan |
独立完成 |
B140200082（尹盛文） |
12 |
Bending characteristics of top-hat structures through tailor rolled blank（TRB）process |
THIN-WALLED STRUCTURES |
2018,123:420-440 |
SCI |
2区 |
3.037 |
2000 |
Huile Zhang, Guangyong Sun,Zhi Xiao, Guangyao Li, Qing Li |
非独立完成（第一完成人） |
B140200084（张慧乐） |
13 |
EES-EOQ model with uncertain acquisition quantity and market demand in dedicated or combined remanufacturing systems |
APPLIED MATHEMATICAL MODELLING |
2018,64(12):135-167 |
SCI |
1区 |
2.94 |
1500 |
Haolan Liao, Qianwang Deng |
独立完成 |
B140200094（廖浩岚） |
14 |
A carbon-constrained EOQ model with uncertain demand for remanufactured products |
Journal of Cleaner Production |
2018,199(10):334-347 |
SCI |
2区 |
6.352 |
2000 |
HaolanLiao，Qianwang Deng |
独立完成 |
B140200094（廖浩岚） |
15 |
A study on die wear prediction for automobile panels stamping based on dynamic model |
International Journal of Advanced Manufacturing Technology |
2018,97:1823-1833 |
SCI |
3区 |
2.748 |
1500 |
Xiaoyong Qiao,Aiguo Cheng,Xin Nie, Minqing Ning |
非独立完成（第一完成人） |
B140200095（乔晓勇） |
16 |
Quantitative study on influence factors of power performance of variable valve timing（VVT）engines and correction of its governing equation |
ENERGY |
2018,157: 314-326 |
SCI |
1区 |
5.582 |
2000 |
Zhipeng Yuan, Jianqin Fu, Qi Liu,Yinjie Ma,Zhangsong Zhan |
非独立完成（第一完成人） |
B140200096（袁志鹏） |
17 |
Crashworthiness analysis and multi-objective design optimization of a novel lotus root filled tube (LFT) |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2015,57（2）：865-875 |
SCI |
2区 |
3.269 |
2000 |
Zhuo Li, Libin Dua, Tao Chen, Zhaohui Hu |
非独立完成（第一完成人） |
B1402S0058（李卓） |
18 |
A new singular element for evaluating stress intensity factors of V-shaped notches under mixed-mode load |
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
2018,93: 161-166 |
SCI |
3区 |
1.925 |
1000 |
Jianming Zhang , Yunqiao Dong , Chuanming Ju , Weicheng Lin |
独立完成（第一完成人） |
B1402S0067（董云桥） |
19 |
Two-level multiple cross-sectional shape optimization of automotive body frame with exact static and dynamic stiffness constraints |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2018,58(5):2309-2323 |
SCI |
2区 |
3.269 |
2000 |
Qin,H;Liu,ZJ;Zhong,HL;Liu,Y; Lv, C |
非独立完成（第一完成人） |
B1402S0068（秦欢） |
20 |
A three-dimensional unit cell model with controllable crimped structure for investigating finite strain response of collagen fiber reinforced biological composites |
Composites Science and Technology |
2018,164,178-186 |
SCI |
1区 |
5.202 |
2500 |
Li Liu, Dean Hu, Xu Han |
非独立完成（第一完成人） |
B1402S0072（刘丽） |
21 |
Experimental research on the mechanism of non-monotonic characteristic between curing temperature and mechanical behaviors of Kevlar/epoxy composite |
Science China-Technological Sciences |
2018,61(7),1012-1020 |
SCI |
3区 |
1.483 |
1000 |
LIU Li, HU DeAn, ZHANG YouMin & HAN Xu |
非独立完成（第一完成人） |
B1402S0072（刘丽） |
22 |
Corrosion Behavior and Mechanism of Basalt Fibers in Sodium Hydroxide Solution |
Materials |
DOI:10.3390/ma11081381 |
SCI |
2区 |
3.325 |
2000 |
Chunhong Tang,Hao Jiang,Xu Zhang, Guangyao Li,Junjia Cui |
非独立完成（第一完成人） |
B1402S0076（唐春红） |
23 |
Influences of spline assembly methods on nonlinear characteristics of spline-gear system |
MECHANISM AND MACHINE THEORY |
2018,127:33-51 |
SCI |
1区 |
3.003 |
2000 |
Hu Xiaolan，Hu Bo，Feitie Zhang，Bing Fu，Hangyang Li，Yunshan Zhou |
独立完成 |
B150200076（胡哓岚） |
24 |
An efficient evidence-based reliability analysis method via piecewise hyperplane approximation of limit state function |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2018,58(8):1-13 |
SCI |
2区 |
3.269 |
2000 |
Lixiong Cao, Jie Liu, Xu Han, Chao Jiang, Qiming Liu |
独立完成 |
B150200077（曹立雄） |
25 |
Nonlinear dynamic analysis of a rotor-bearing system with porous tilting pad bearing support |
Nonlinear Dynamics |
2018,94(2) :1391-1408 |
SCI |
1区 |
3.906 |
2000 |
Yihua Wu， Kai Feng， Yun Zhang，Wanhui Liu，Wenjun Li |
非独立完成（第一完成人） |
B150200081（伍奕桦） |
26 |
Theoretical investigation on porous tilting pad bearings considering tilting pad motion and porous material restriction |
Precision Engineering-Journal of The International Societies for Precision Engineering and Nanotechnology |
2018, 53: 26-37 |
SCI |
3区 |
2.684 |
1500 |
Kai Feng， Yihua Wu， Wanhui Liu， Xueyuan Zhao， Wenjun Li |
非独立完成（第一完成人） |
B150200081（伍奕桦） |
27 |
A novel prediction method for gear friction coefficients based on a computational inverse technique |
TRIBOLOGY INTERNATIONAL |
2018,127:200-208 |
SCI |
2区 |
3.276 |
2000 |
Changjiang Zhou, Bo Hu, Xuanlv Qian, Xu Han |
独立完成 |
B150200087（胡波） |
28 |
Elastic dynamics modelling and analysis for a valve train including oil film stiffness and dry contact stiffness |
Mechanism and Machine Theory |
2019，131 : 33-47 |
SCI |
1区 |
3.003 |
2000 |
Hu, Bo，Zhou, Changjiang，Chen, Siyu |
非独立完成(第一完成人) |
B150200087（胡波） |
29 |
Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle |
ENERGY CONVERSION AND MANAGEMENT |
2018,169:194-205 |
SCI |
1区 |
6.161 |
2500 |
Jiaqiang Ea,c, Zhiqing Zhang,Jingwei Chen,MinhHieu Pham,Xiaohuan Zhao, Qingguo Peng, Bin Zhang,Zibin Yind |
非独立完成（第一完成人） |
B150200091（张志清） |
30 |
Microstructure and mechanical properties of Al2O3-ZrO2 ceramic deposited by laser direct material deposition |
CERAMICS INTERNATIONAL |
2018,44:18960-18968 |
SCI |
1区 |
2.882 |
1500 |
Fazhi Li, Xinwang Zhang, Changyou Sui, Jiazhu Wu, Haiying Wei, Yi Zhang |
非独立完成（第一完成人） |
B150200092（李发智） |
31 |
Structural topology optimization of a stamping die made from high-strength steel sheet metal based on load mapping |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2018,58(2):769-784 |
SCI |
2区 |
3.269 |
2000 |
Hangyan Wang, Hui Xie, Qiming Liu,Yunfei Shen, Pinjian Wang,Licheng Zhao |
独立完成 |
B150200094（王杭燕） |
32 |
New technology for cutting ferrous metal with diamond tools |
DIAMOND AND RELATED MATERIALS |
2018,88:32-42 |
SCI |
3区 |
2.209 |
1500 |
Qingchun Tan，Shaohui Yin，Fengjun Chen，Shuai Huang，Hu Luo |
非独立完成（第一完成人） |
B150200095（唐清春） |
33 |
Development of powder distribution model of discontinuous coaxial powder stream in laser direct metal deposition |
POWDER TECHNOLOGY |
2018,340:449-458 |
SCI |
2区 |
3.331 |
2000 |
Wu, JZ; Zhao, PH; Wei,HY;Lin,QD;Zhang, Y |
非独立完成（第一完成人） |
B150200096（吴家柱） |
34 |
Dynamic compression behavior of 6005 aluminum alloy aged at elevated temperatures |
Vacuum |
2018,155:604-611 |
SCI |
3区 |
1.867 |
1000 |
Long Zhang, Hong He, Shikang Li, Xiaodong Wu, Luoxing Li |
独立完成 |
B150200102（张龙） |
35 |
A Bee Evolutionary Algorithm for Multiobjective Vehicle Routing Problem with Simultaneous Pickup and Delivery |
MATHEMATICAL PROBLEMS IN ENGINEERING |
https://doi.org/10.1155/2018/2571380 |
SCI |
4区 |
1.156 |
1000 |
Guiliang Gong, Qianwang Deng,Xuran Gong,Like Zhang,Haibin Wang, He Xie |
非独立完成（第一完成人） |
B150200104（龚桂良） |
36 |
Similarity analysis and comparative study on the performance of counter-flow dew point evaporative coolers with experimental validation |
ENERGY CONVERSION AND MANAGEMENT |
2018,169:97-110 |
SCI |
1区 |
6.161 |
2500 |
Wan, YD; Lin, J; Chua, KJ; Ren, CQ |
非独立完成（第一完成人） |
B1502S0057（万杨大） |
37 |
Expanding element interpolation method for analysis of thin-walled structures |
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
2018,86:82-88 |
SCI |
3区 |
1.925 |
1000 |
Zhang,JM;Zhong,YD;Dong,YQ; Lin, WC |
独立完成 |
B1502S0058（钟玉东） |
38 |
Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air |
ENERGY |
2018,160:349-360 |
SCI |
1区 |
5.582 |
2000 |
Qingguo Peng, Jiaqiang E,W.M. Yang,Hongpeng Xu,Jingwei Chen, Tian Meng,Runzhi Qiu |
非独立完成（第一完成人） |
B1502S0059（彭庆国） |
39 |
Experimental study on the energy flow of a gasoline-powered vehicle under the NEDC of cold starting |
Applied Thermal Engineering |
2017,115:1173-1186 |
SCI |
1区 |
3.929 |
2000 |
Xiongbo Duan,JianqinFu ,Zhizhong Zhang Jingping Liu b, Dan Zhao c, Guohui Zhu |
非独立完成（第一完成人） |
B1502S0066（段雄波） |
40 |
Strain rate sensitivity of Al-Fe magnetic pulse welds |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2018,262:1-10 |
SCI |
2区 |
3.817 |
2000 |
Huihui Geng, Jingqi Mao, Xu Zhang, Guangyao Li, Junjia Cui |
非独立完成（第一完成人） |
B1502S0071（耿辉辉） |
41 |
Integrated Numerical Analysis on the Performance of a Hybrid Gas-lubricated Bearing Utilising Near-field Acoustic Levitation |
Tribologytransactions |
2018,61(3):482-493 |
SCI |
3区 |
1.78 |
1000 |
Kai Feng, Minghui Shi, Tao Gong,etc. |
独立完成 |
B1502Z0051（石明辉） |
42 |
The effective elastic properties analysis of periodic microstructure with hybrid uncertain parameters |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2018,148：:39-49 |
SCI |
2区 |
3.622 |
2000 |
Zhu, Wenqing，Chen, Ning，Liu, Jian，Xia, Siyuan |
独立完成 |
B160200085（朱文卿） |
43 |
Maximizing wave attenuation in viscoelastic phononic crystals by topology optimization |
Ultrasonics |
DOI:10.1016/j.ultras.2018.05.005 |
SCI |
3区 |
2.37 |
1500 |
Chen Yafeng; Guo Di; Li Yang Fan; Li Guangyao; Huang Xiaodong |
非独立完成（第一完成人） |
B160200088（陈亚枫） |
44 |
Winding orientation optimization design of composite tubes based on quasi-static and dynamic experiments |
THIN-WALLED STRUCTURES |
2018,127:425-433 |
SCI |
2区 |
3.037 |
2000 |
Zheyi Zhang , Shujuan Hou , Qiming Liu , Xu Han |
非独立完成（第一完成人） |
B160200093（张哲绎） |
45 |
High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations |
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING |
2018,122:119-136 |
SCI |
2区 |
3.696 |
2000 |
Sun,GY;Chen,DD;Wang,HX ;Hazell, PJ; Li, Q |
非独立完成（第一完成人） |
B160200099（陈东东） |
46 |
Reconfigurable topological phononic crystal slabs |
Physics Letters A |
2018,382(39):2880-2885 |
SCI |
3区 |
1.776 |
1000 |
Lu-yang Feng, Hong-bo Huang, Jian-cheng Zhang, Xiao-ping Xie , Jiu-jiu Chen |
非独立完成（第一完成人） |
B160200100（冯陆洋） |
47 |
Nonlinear bending and vibration analysis of functionally graded porous tubes via a nonlocal strain gradient theory |
COMPOSITE STRUCTURES |
2018,203:614-623 |
SCI |
2区 |
4.451 |
2000 |
Gui-Lin She,Fuh-Gwo Yuan, Yi-Ru Ren, Hai-Bo Liu, Wan-Shen Xiao |
非独立完成（第一完成人） |
B160200101（佘桂林） |
48 |
Wave propagation of functionally graded porous nanobeams based on non-local strain gradient theory |
European Physical Journal Plus |
2018,133:368 |
SCI |
3区 |
1.919 |
1000 |
Gui-Lin She, Kun-Ming Yan, Yan-Long Zhang, Hai-Bo Liu, Yi-Ru Ren |
非独立完成（第一完成人） |
B160200101（佘桂林） |
49 |
On vibrations of porous nanotubes |
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE |
2018,125:23-35 |
SCI |
1区 |
5.429 |
2000 |
She Gui-Lin, Ren Yi-Ru, Yuan Fuh-Gwo, Xiao Wan-Shen |
非独立完成（第一完成人） |
B160200101（佘桂林） |
50 |
On wave propagation of porous nanotubes |
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE |
2018,130:62-74 |
SCI |
1区 |
5.429 |
2000 |
Gui-Lin She, Fuh-Gwo Yuan,Yi-Ru Ren |
非独立完成（第一完成人） |
B160200101（佘桂林） |
51 |
Study on thermal buckling and post-buckling behaviors of FGM tubes resting on elastic foundations |
STRUCTURAL ENGINEERING AND MECHANICS |
2018,66(6):729-736 |
SCI |
4区 |
1.63 |
1000 |
Gui-Lin She, Yi-Ru Ren, Wan-Shen Xiao,Haibo Liu |
非独立完成（第一完成人） |
B160200101（佘桂林） |
52 |
Forward and inverse structural uncertainty propagations under stochastic variables with arbitrary probability distributions |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018,342: 287-320 |
SCI |
1区 |
4.499 |
2500 |
Jie Liu, Xianghua Meng, Can Xu, Dequan Zhang, Chao Jiang |
非独立完成(第一完成人) |
B160200104（蒙象华 |
53 |
Effect analysis on power coefficient enhancement of a convective wind energy collecting device in the expressway |
ENERGY CONVERSION AND MANAGEMENT |
2018,171: 249-271 |
SCI |
1区 |
6.161 |
2500 |
Wenyu Hu, Jiaqiang E, Yuanwang Deng, Lijun Li, Dandan Han, Xiaohuan Zhao, Zhiqing Zhang, Qingguo Peng |
非独立完成（第一完成人） |
B160200112（胡文宇） |
54 |
A refined analysis for the transversely isotropic plate under normal loads with the 3D Green's function |
Acta Mechanica |
2018,229(9):3767-3779 |
SCI |
3区 |
1.997 |
1000 |
Peng Fei Hou, Jiayun Chen |
非独立完成（第一完成人） |
B1602S0056（陈家运） |
55 |
Two-dimensional Greens function of orthotropic three-phase material under a normal line force with application in the design of composite |
APPLIED MATHEMATICAL MODELLING |
2018,60:384-415 |
SCI |
1区 |
2.94 |
1500 |
Peng-Fei Hou,Jia-Yun Chen,Yang Zhang |
非独立完成（第一完成人） |
B1602S0056（陈家运） |
56 |
A refined analysis for the transversely isotropic plate under tangential loads by the 3D Green's function |
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
2018,93:10-20 |
SCI |
3区 |
1.925 |
1000 |
Peng Fei Hou, Jiayun Chen |
非独立完成（第一完成人） |
B1602S0056（陈家运） |
57 |
2D accurate solutions for the orthotropic plate under normal load |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2018,145:1-8 |
SCI |
2区 |
3.622 |
2000 |
Peng Fei Hou, Jiayun Chen |
非独立完成（第一完成人） |
B1602S0056（陈家运） |
58 |
First-principles predictions of structural, mechanical and electronic properties of beta TiNb under high pressure |
SUPERLATTICES AND MICROSTRUCTURES |
2018,116:141-150 |
SCI |
3区 |
2.09 |
1500 |
Z.P. Wang, Q.H. Fang, J. Li, B. Liu |
非独立完成（第一完成人） |
B1602S0058（王志鹏） |
59 |
Experimental validation of network modeling method on a three-modular floating platform model |
Coastal Engineering |
2018,137:92-102 |
SCI |
1区 |
3.139 |
2000 |
QJ Shi, HC Zhang, DL Xu, ER Qi, C Tian, J Ding, YS Wu,Y Lu,ZW Li |
非独立完成（第一完成人） |
B1602S0059（施奇佳） |
60 |
Optimized stiffness combination of a flexible-base hinged connector for very large floating structures |
Marine Structures |
2018,60: 151-164 |
SCI |
1区 |
2.584 |
1500 |
QJ Shi,DL Xu,HC Zhang,H Zhao,YS Wu |
非独立完成（第一完成人） |
B1602S0059（施奇佳） |
61 |
Analysis of heat transfer problems using a novel low-order FEM based on gradient weighted operation |
INTERNATIONAL JOURNAL OF THERMAL SCIENCES |
2018,132:52-64 |
SCI |
2区 |
3.707 |
2000 |
Z.C. Li, X.Y. Cui, Y. Cai |
非独立完成（第一完成人） |
B1602S0061（李子超） |
62 |
Root defects in full penetration laser welding of thick plates using steady electromagnetic force |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2018,260:97–103 |
SCI |
2区 |
3.817 |
2000 |
Yi Qi, Genyu Chen |
非独立完成（第一完成人） |
B1602S0062（齐毅） |
63 |
Subwavelength acoustic topological edge states realized by zone folding and the role of boundaries selection |
Journal of Applied Physics |
2018,124(17): 175107 |
SCI |
3区 |
2.163 |
1500 |
Hongqing Dai, Muyan Qian, Junrui Jiao, Baizhan Xia, and Dejie Yu |
独立完成 |
B1602S0065（代洪庆） |
64 |
An efficient structural optimization approach for the modular automotive body conceptual design |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2018,53(3):1275-1289 |
SCI |
2区 |
3.269 |
2000 |
Liu Yu，Liu Zijian，Qin Huan，Zhong Haolong，Lv Cheng |
非独立完成（第一完成人） |
B1602S0071（刘瑜） |
65 |
An edge-based smoothed finite element method for nonlinear magnetostatic and eddy current analysis |
APPLIED MATHEMATICAL MODELLING |
2018,62:287-302 |
SCI |
1区 |
2.94 |
1500 |
She Li,Xiangyang Cui |
非独立完成（第一完成人） |
B1602S0073（李射） |
66 |
Modelling and demonstration of electromagnetically assisted stamping system using an interactive mapping method |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2018,144:312-323 |
SCI |
2区 |
3.622 |
2000 |
She Li,Xiangyang Cui,Guangyao Li |
非独立完成（第一完成人） |
B1602S0073（李射） |
67 |
Stress optimization of smooth continuum structure based on the distortion strain energy density |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2019,343:276-296 |
SCI |
1区 |
4.499 |
2500 |
Baoshou Liu, Di Guo, Chao Jiang, Guangyao Lia, Xiaodong Huang |
非独立完成(第一完成人) |
B1602S0077（刘宝收） |
68 |
Three-Dimensional-Stacked Gold Nanoparticles with Sub-5 nm Gaps on Vertically Aligned TiO2 Nanosheets for Surface-Enhanced Raman Scattering Detection Down to 10 fM Scale |
ACS APPLIED MATERIALS & INTERFACES |
2018,10(41):35607-35614 |
SCI |
1区 |
8.284 |
2000 |
Xuejiao Wang, Xupeng Zhu, Huimin Shi , Yiqin Chen , Zhiquan Chen, Yixuan Zeng, Zhixiang Tang , and Huigao Duan |
非独立完成(第一完成人) |
B1610S0247（王雪娇） |
69 |
Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process |
Journal of Materials Engineering and Performance |
2018，27，8: 4025-4035 |
SCI |
4区 |
1.508 |
1000 |
Hang OuXu ZhangJunrui XuGuangyao LiJunjia Cui |
非独立完成（第一完成人） |
B170200088（欧航） |
70 |
Investigation on the combustion performance enhancement of the premixed methane/air in a two-step micro combustor |
Applied Thermal Engineering |
2018,141:114-125 |
SCI |
1区 |
3.929 |
2000 |
Jiaqiang E, Haojie Liu, Xiaohuan Zhao, Dandan Han, Qingguo Peng, Wei Zuo, Tian Meng, Runzhi Qiu |
非独立完成(第一完成人) |
B170200101（赵晓欢） |
71 |
Design multi-stopband laminate acoustic metamaterials for structural-acoustic coupled system |
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
2018,115:418-433 |
SCI |
2区 |
4.525 |
2000 |
X. Xiao,Z.C. He,Eric Li, A.G. Cheng |
非独立完成（第一完成人） |
B170200109（肖潇） |
72 |
Microscale finite element analysis for predicting effects of air voids on mechanical properties of single fiber bundle in composites |
Journal of Materials Science |
2019，54(2): 1363-1381. |
SCI |
2区 |
2.733 |
1500 |
Hongyong Jiang, Yiru Ren, Zhihui Liu，Songjun Zhang |
非独立完成（第一完成人） |
B170200111（蒋宏勇） |
73 |
Evaluations of failure initiation criteria for predicting damages of composite structures under crushing loading |
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES |
2018,37(21): 1279-1303 |
SCI |
4区 |
1.471 |
1000 |
Hongyong Jiang,Yiru Ren,ZhihuiLiu, SongjunZhang ,Xiaoqing Wang |
非独立完成（第一完成人） |
B170200111（蒋宏勇） |
74 |
Multi-scale analysis for mechanical properties of fiber bundle and damage characteristics of 2D triaxially braided composite panel under shear loading |
THIN-WALLED STRUCTURES |
2018,132: 276-286 |
SCI |
2区 |
3.037 |
2000 |
Jiang,Hongyong; Ren, Yiru; Liu, Zhihui |
非独立完成（第一完成人） |
B170200111（蒋宏勇） |
75 |
Non-probabilistic convex model theory to obtain failure shear stress of simulated lunar soil under interval uncertainties |
Probabilistic Engineering Mechanics |
2018,53:87-94 |
SCI |
3区 |
2.235 |
1500 |
Gang Zhao, Jie Liu, Guilin Wen, Fangyi Li, Zhewu Chen |
非独立完成（第一完成人） |
B1702S0072（赵刚） |
76 |
Molecular dynamics study of plastic deformation mechanism in Cu/Ag multilayers |
CHINESE PHYSICS B |
2017,12(26);126802 |
SCI |
3区 |
1.066 |
1000 |
Yuan-Yuan Tian, Jia Li, Ze-Ying Hu, Zhi-Peng Wang, and Qi-Hong Fang |
独立完成 |
B1802S0062（田圆圆） |
77 |
Revealing the deformation mechanism of amorphous polyethylene subjected to cycle loading via molecular dynamics simulations |
RSC Advances |
2018,8(56);32377-32386 |
SCI |
3区 |
3.096 |
2000 |
Qihong Fang, Yuanyuan Tian,Hong Wu, Jia Li |
非独立完成（第一完成人） |
B1802S0062（田圆圆） |
78 |
Self-ordering induces multiple topological transitions for in-plane bulk waves in solid phononic crystals |
PHYSICAL REVIEW B |
2018,98(1):014302 |
SCI |
2区 |
3.704 |
2000 |
Jiujiu Chen, Hongbo Huang, Shaoyong Huo,Zhuhua Tan, Xiaoping Xie, Jianchun Cheng,Guo-liang Huang |
非独立完成（第一完成人） |
B1802S0074（黄宏波） |
79 |
An Efficient Approach for Reliability-Based Design Optimization Combined Sequential Optimization with Approximate Models |
International Journal of Computational Methods |
Doi:10.1142/S0219876218500184 |
SCI |
4区 |
0.805 |
500 |
Bao Quoc Doan,Guiping Liu,Gan Xu |
非独立完成(第一完成人) |
B7827323护照（NGUYEN VIET HUNG） 银行卡号：6222021901020464028 |
80 |
On crashing behaviors of aluminium/CFRP tubes subjected to axial and oblique loading: An experimental study |
COMPOSITES PART B-ENGINEERING |
2018,145:47-56 |
SCI |
1区 |
4.858 |
2000 |
Sun, Guangyong，Li, Shunfeng，Li, Guangyao，Li, Qing |
非独立完成（第一完成人） |
S140200342（李顺峰） |
81 |
Stiffness and damping models for the oil film in line contact elastohydrodynamic lubrication and applications in the gear drive |
APPLIED MATHEMATICAL MODELLING |
2018,61:634-649 |
SCI |
1区 |
2.94 |
1500 |
Zhou Changjiang, Xiao Zeliang |
非独立完成（第一完成人） |
S140200354（肖泽亮） |
82 |
Investigation on thermal performance and pressure loss of the fluid cold-plate used in thermal management system of the battery pack |
Applied Thermal Engineering |
2018,145:552-568 |
SCI |
1区 |
3.929 |
2000 |
Jiaqiang,E;Xu,SJ;Deng, YW; Zhu,H;Zuo,W;Wang,HC;Chen,JM;Peng,QG;Zhang, ZQ |
非独立完成（第一完成人） |
S1402W0150（许时杰） |
83 |
Subsurface damage in grinding of brittle materials considering machining parameters and spindle dynamics |
International Journal of Advanced Manufacturing Technology |
2018,97:3723-3734 |
SCI |
3区 |
2.748 |
1500 |
Zhang Liang, Liu Wenyang, Chen Jianbin,Fang Qihong |
非独立完成(第一完成人) |
S150200202（张亮） |
84 |
Numerical and experimental investigations in electromagnetic riveting with different rivet dies |
International Journal of Material Forming |
2018，11: 839-853 |
SCI |
4区 |
1.978 |
1000 |
Junjia CuiLin QiHao JiangGuangyao LiXu Zhang |
非独立完成(第一完成人) |
S150200212（齐麟） |
85 |
Theoretical design, manufacturing, and numerical prediction of a novel multileaf foil journal gas bearing for PowerMEMs |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY |
2018,232(7):823-836 |
SCI |
4区 |
1.415 |
1000 |
Kai Feng, Min Zhang, Wen-jun Li, Peng jin, Xing-gang Wang |
非独立完成（第一完成人） |
S150200224（张敏） |
86 |
Update-grid reanalysis method based on NS-FEM for 3D heat transfer problems |
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS |
2018,95:142-153 |
SCI |
3区 |
1.925 |
1000 |
Hao Chong, Hu Wang, Enying Li |
非独立完成（第一完成人） |
S150200228（种浩） |
87 |
An energy dissipation-based fatigue crack growth model |
International Journal of Fatigue |
2018,114: 167-176 |
SCI |
2区 |
3.25 |
2000 |
X.G.WangH.R.RanC.JiangQ.H.Fang |
独立完成 |
S150200316（冉红瑞） |
88 |
A sparse polynomial surrogate model for phononic crystals with uncertain parameters |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018,339:681-703 |
SCI |
1区 |
4.499 |
2500 |
Chen, Junhuang，Xia, Baizhan，Liu, Jian |
独立完成 |
S150200328（S150200328） |
89 |
Experimental and numerical study on thermal performance of Li(NixCoyMnz)O2 spiral-wound Lithium-ion batteries |
Applied Thermal Engineering |
2018,138: 446–455 |
SCI |
1区 |
3.929 |
2000 |
Xiaolong Yang,Pengfei Yang,Zeping Zhang,Yongkang Duan，Jihao Hu |
独立完成 |
S150200354杨鹏飞 |
90 |
Crashworthiness optimization of automotive parts with tailor rolled blank |
ENGINEERING STRUCTURES |
2018,169:201-215 |
SCI |
2区 |
3.06 |
2000 |
Guangyong Sun,Jun Tian,Tangying Liu, Xiaolei Yan, Xiaodong Huang |
非独立完成（第一完成人） |
S1502W0222（田军） |
91 |
A systematic investigation of cycle number, temperature and electric field strength effects on Si anode |
Materials and Design |
2018,144:1-13 |
SCI |
2区 |
4.753 |
2000 |
Qihong Fang,QiongWang,Jia Li,Eenze Chen,Bin Liu,PihuaWen |
非独立完成（第一完成人） |
S160200211（王琼） |
92 |
Reanalysis assisted metaheuristic optimization for free vibration problems of composite laminates |
COMPOSITE STRUCTURES |
2018,206:380-391 |
SCI |
2区 |
4.451 |
2000 |
Xiangcheng Li, Hu Wang, Guangyao Li |
独立完成 |
S160200306（李想成） |
93 |
Mechanical properties of hybrid composites reinforced by carbon and basalt fibers |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2018,148:636-651 |
SCI |
2区 |
3.622 |
2000 |
Guangyong Sun, Shaowei Tong,Dongdong Chen,Zhihui Gong, Qing Li |
非独立完成（第一完成人） |
S160200310（童少尉） |
94 |
Multi-Scale Progressive Damage Model for Analyzing the Failure Mechanisms of 2D Triaxially Braided Composite under Uniaxial Compression Loads |
APPLIED COMPOSITE MATERIALS |
2018,25（4）：921-938 |
SCI |
4区 |
1.633 |
1000 |
Songjun Zhang， Hongyong Jiang，Yiru Ren， Zhansen Qian， Zheqi Lin |
非独立完成(第一完成人) |
S1602W0109（张松俊） |
95 |
Fiber laser cutting of CFRP laminates with single- and multi-pass strategy: A feasibility study |
Optics and Laser Technology |
2018,107: 443-453 |
SCI |
3区 |
2.094 |
1500 |
Maojun Li, Shuo Li, Xujing Yang, Yi Zhang, Zhichao Liang |
独立完成 |
S1602W0118（李硕） |
96 |
Study on burr occurrence and surface integrity during slot milling of multidirectional and plain woven CFRPs |
International journal of advanced manufacturing technology |
DOI: https://doi.org/10.1007/s00170-018-1937-6 |
SCI |
3区 |
2.748 |
1500 |
Maojun Li, Mingjie Huang, Xiaogeng Jiang, Chun-liang Kuo, Xujing Yang |
非独立完成（第一完成人） |
S1602W0123 （黄铭杰） |
97 |
Effect of surface treatment on the mechanical properties and microstructures of Al-Fe single-lap joint by magnetic pulse welding |
International Journal of Advanced Manufacturing Technology |
2018,98(5-8):1081-1092 |
SCI |
3区 |
2.748 |
1500 |
Junjia Cui, Tao Sun, Huihui Geng, Wei Yuan, Guangyao Li1, Xu Zhang |
非独立完成（第一完成人） |
S1602W0126（孙涛） |
98 |
On fracture characteristics of adhesive joints with dissimilar materials - An experimental study using digital image correlation（DIC）technique |
COMPOSITE STRUCTURES |
2018,201:156-1075 |
SCI |
2区 |
4.451 |
2000 |
Sun Guangyong，Liu Xinglong, Gang Zheng, Zhihui Gonga,Qing Li |
非独立完成（第一完成人） |
S1602W0170（刘兴隆） |
99 |
Non-probabilistic interval process analysis of time-varying uncertain structures |
ENGINEERING STRUCTURES |
2018,175(15),101-112 |
SCI |
2区 |
3.06 |
2000 |
Baizhan Xia, Lifang Wang |
独立完成 |
S1602W0172（王丽芳） |
100 |
A cellular metastructure incorporating coupled negative thermal expansion and negative Poisson's ratio |
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
2018,150:255-267 |
SCI |
2区 |
2.864 |
1500 |
Wei Kai, Peng Yong, Qu Zhaoliang, Pei Yongmao, Fang Daining |
非独立完成(第一完成人) |
S1602W0224（彭勇） |
101 |
In-Situ Synthesis of 3D Carbon Coated Zinc-Cobalt Bimetallic Oxide Networks as Anode in Lithium-Ion Batteries |
CHEMELECTROCHEM |
2018,5（13),1708-1716 |
SCI |
2区 |
4.312 |
2000 |
Siyu Zhong，Hang Zhang，Jiecai Fu，Huimin Shi，Lei Wang，Wei Zeng，Quanhui Liu，Guanhua Zhang，Huigao Duan |
非独立完成(第一完成人) |
S160700568（钟丝雨） |
102 |
A polynomial expansion approach for response analysis of periodical composite structural-acoustic problems with multi-scale mixed aleatory and epistemic uncertainties |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018,342(12):509-531 |
SCI |
1区 |
4.499 |
2500 |
Ning Chen, Yingbin Hu, Dejie Yu, Jian Liu, Michael Beer |
非独立完成（第一完成人） |
S170200261（胡颖彬） |
103 |
Hybrid interval and random analysis for structural-acoustic systems including periodical composites and multi-scale bounded hybrid uncertain parameters |
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
2019, 115 :524-544 |
SCI |
2区 |
4.525 |
2000 |
Ning Chen，Siyuan Xia，Dejie Yu，Jian Liu，Michael Beer |
非独立完成（第一完成人） |
S170200266（夏思源） |
104 |
Non-Isothermal Crystallization Kinetics of Short Glass Fiber Reinforced Poly (Ether Ether Ketone) Composites |
Materials |
2018,11(11) |
SCI |
2区 |
3.325 |
2000 |
Yang,Xujing;Wu,Yazhuo; Wei,Kai;Fang,Wenjun;Sun, Haofei |
独立完成 |
S170200322（武亚卓） |
105 |
Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review |
Applied Thermal Engineering |
2018,142:10-29 |
SCI |
1区 |
3.929 |
2000 |
Yuanwang Deng, Changling Feng, Jiaqiang E, Hao Zhu, Jingwei Chen, Ming Wen, Huichun Yin |
非独立完成（第一完成人） |
S170200360（冯长岭） |
合计 |
|
|
|
|
|
|
178000 |
|
|
|
