序号 |
论文名称 |
期刊名称 |
卷期页 |
收录 类型 |
期刊 分区 |
影响 因子 |
奖励 金额（元） |
作者(全部) |
完成 情况 |
奖励作者学号姓名 |
1 |
Microscopic mechanism of amino silicone oil modification and modification effect with different amino group contents based on molecular dynamics simulation |
APPLIED SURFACE SCIENCE |
2018,440:(331-340) |
SCI |
2区 |
3.184 |
2000 |
He, Liping, Li, Wenjun , Chen, Dachuan, Yuan, Jianmin,Lu, Gang , Zhou, Dianwu |
非独立完成（第一完成人） |
B1002S0006(李文军) |
2 |
Crystal growth kinetics, microstructure and electrochemical properties of LiFePO4/carbon nanocomposites fabricated using a chelating structure phosphorus source |
RSC ADVANCES |
2018,8(6): 3151-3160 |
SCI |
3区 |
3.257 |
2000 |
He, LP; Zha, WK; Chen, DC |
非独立完成（第一完成人） |
B1002S0014(查文珂) |
3 |
A residual stress dependent multiaxial fatigue life model of welded structures |
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES |
2018,41(2):300-313 |
SCI |
3区 |
1.927 |
1000 |
Liu, ZC; Jiang, C; Li, BC; Wang, XG |
非独立完成（第一完成人） |
B12020039(刘志成） |
4 |
Identification of Voids in Structures Based on Level Set Method and FEM |
INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS |
10.1142/S0219876218500159 |
SCI |
4区 |
1.012 |
1000 |
Zhang LX,Yang G, Hu DA |
独立完成 |
B1202S030张利轩 |
5 |
Smoothed particle hydrodynamics simulation for injection molding flow of short fiber reinforced polymer composites |
JOURNAL OF COMPOSITE MATERIALS |
2018,52(11):1531-1539 |
SCI |
4区 |
1.595 |
1000 |
Liping He, Gang Lu, Dachuan Chen, Wenjun Li, Liangpeng Chen, Jianmin Yuan; Chunsheng Lu |
非独立完成（第一完成人） |
B1302H0037（卢钢） |
6 |
A quasi-implicit characteristic-based penalty finite-element method for incompressible laminar viscous flows |
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING |
2018,114（2）：147-171 |
SCI |
2区 |
2.575 |
1500 |
Jiang, Chen，Zhang, Zhi-Qian，Han, Xu，Liu, Guirong，Gao, Guang-Jun，Lin, Tao |
非独立完成（第一完成人） |
B1302S0005（姜琛） |
7 |
Continuum topology optimization considering uncertainties in load locations based on the cloud model |
ENGINEERING OPTIMIZATION |
2018,50(6):1041-1060 |
SCI |
3区 |
1.737 |
1000 |
Jie Liu，Guilin Wen |
独立完成 |
B1302S0013（刘杰） |
8 |
Comprehensive study of key operating parameters on combustion characteristics of butanol-gasoline blends in a high speed SI engine |
APPLIED ENERGY |
2018,212:13-32 |
SCI |
1区 |
7.5 |
2000 |
Kaimin Liu，Yangtao Li，Jing Yang，Banglin Deng，Renhua Feng |
非独立完成（第一完成人） |
B1302S0016（刘凯敏） |
9 |
Measurement and prediction of nonlinear dynamics of a gas foil bearing supported rigid rotor system |
MEASUREMENT |
2018, 121, 205-217 |
SCI |
3区 |
2.255 |
1500 |
Zhiyang Guo, Lyu Peng, Kai Feng, Wanhui Liu |
独立完成（第一完成人） |
B1302S0021（郭志阳） |
10 |
Nonlinear dynamic analysis of rigid rotor supported by gas foil bearings: Effects of gas film and foil structure on subsynchronous vibrations |
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
2018, 107: 549-566 |
SCI |
1区 |
4.874 |
2000 |
Zhiyang Guo, Kai Feng, Tianyu Liu, Peng Lyu, Tao Zhang |
独立完成（第一完成人） |
B1302S0021（郭志阳） |
11 |
Multi-objective system reliability-based optimization method for design of a fully parametric concept car body |
ENGINEERING OPTIMIZATION |
2017,49(7):1247-1263 |
SCI |
3区 |
1.737 |
1000 |
LB Duan, GY Li, AG Cheng, GY Sun, K Song |
非独立完成（第一完成人） |
B1302S0022（段利斌） |
12 |
Evolutionary topology optimization of continuum structures with smooth boundary representation |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
https://doi.org/10.1007/s00158-017-1846-6 |
SCI |
3区 |
2.894 |
1500 |
Daicong Da，Liang Xia，Guangyao Li, Xiaodong Huang |
独立完成 |
B1302Z0001（达代聪） |
13 |
An arbitrary polynomial chaos expansion approach for response analysis of acoustic systems with epistemic uncertainty |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018,332:280-302 |
SCI |
2区 |
3.957 |
5000 |
Shengwen Yin, Dejie Yu, Zhen Luo, Baizhan Xia |
非独立完成（第一完成人） |
B140200082(尹盛文) |
14 |
Unified polynomial expansion for interval and random response analysis of uncertain structure-acoustic system with arbitrary probability distribution |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018，336：260–285 |
SCI |
2区 |
3.957 |
5000 |
Shengwen Yina, Dejie Yua,∗, Zhen Luob, Baizhan Xiaa a |
非独立完成(第一完成人) |
B140200082(尹盛文) |
15 |
A unified model approach for probability response analysis of structure-acoustic system with random and epistemic uncertainties |
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
2018,111:509-528 |
SCI |
2区 |
4.874 |
2000 |
Shengwen Yin，Dejie Yu，Zhengdong Mab, Baizhan Xia a |
非独立完成(第一完成人) |
B140200082尹盛文 |
16 |
A new multi-objective discrete robust optimization algorithm for engineering design |
APPLIED MATHEMATICAL MODELLING |
2018,53（1）:602-621 |
SCI |
1区 |
2.768 |
1500 |
Sun Guangyong，Zhang Huile，Fang Jianguang，Li Guangyao，Li Qing |
非独立完成（第一完成人） |
B140200084（张慧乐） |
17 |
An atomic-scale and high efficiency finishing method of zirconia ceramics by using magnetorheological finishing |
APPLIED SURFACE SCIENCE |
2018,444:569–577 |
SCI |
2区 |
3.184 |
2000 |
Hu Luo, Meijian Guo, Shaohui Yin, Fengjun Chen, Shuai Huang, Ange Lu, Yuanfan Guo |
独立完成(第一完成人) |
B140200089（罗虎） |
18 |
Robust platform for water harvesting and directional transport |
JOURNAL OF MATERIALS CHEMISTRY A |
2018, 6(14)：5635–5643 |
SCI |
1区 |
8.824 |
2000 |
Hu Luo, Yao Lu, Shaohui Yin, Shuai Huang, Jinlong Song, Faze Chen, Fengjun Chen, Claire J. Carmalt and Ivan P. Parkin |
非独立完成(第一完成人) |
B140200089（罗虎） |
19 |
Continuous twice-impacts analysis of UHMWPE laminate fixed with bolted joints |
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING |
2018,109:293-301 |
SCI |
2区 |
3.098 |
2000 |
Shen, Zhiwei，Hu, Dean，Zhang, Youmin，Cai, Qingyu，Han, Xu |
非独立完成（第一完成人） |
B140200092（沈志伟） |
20 |
Intervention criterion and control research for active front steering with consideration of road adhesion |
VEHICLE SYSTEM DYNAMICS |
2018,56(4):553-578 |
SCI |
3区 |
2.233 |
1500 |
Xiaojian Wu, Bing Zhou, Guilin Wen, Lefei Long & Qingjia Cui |
独立完成 |
B140200098(吴晓建) |
21 |
Energy absorption of metal-composite and metal composite hybrid structures under oblique crushing loading |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2017,000: 1–26 |
SCI |
2区 |
3.192 |
2000 |
Guohua Zhu, Guangyong Sun, Hang Yu,Shunfeng Li, Qing Li |
非独立完成（第一完成人） |
B140200099（朱国华） |
22 |
Structural design and global sensitivity analysis of the composite B-pillar with ply drop-off |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2018,57(3):965-975 |
SCI |
3区 |
2.894 |
1500 |
Liu Q, Li Y, Cao L, et al. |
非独立完成（第一完成人） |
B140200101（刘启明） |
23 |
Topology optimization of phononic crystals with uncertainties |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION. |
2017,56(6):1319-1339 |
SCI |
3区 |
2.894 |
1500 |
Longxiang Xie，Baizhan Xia，Guoliang Huang，Jirong Lei，Jian Liu |
非独立完成(第一完成人) |
B140200102（解龙翔） |
24 |
Numerical investigations on an improved counterflow double-channel micro combustor fueled with hydrogen for enhancing thermal performance |
ENERGY CONVERSION AND MANAGEMENT |
2018,159:163-174 |
SCI |
1区 |
5.472 |
5000 |
Wei Zuo, Jiaqiang E, Rongming Lin |
非独立完成（第一完成人） |
B1402S0055(左威) |
25 |
Bifurcation and nonlinear dynamic behaviours of a metal mesh damped flexible pivot tilting pad gas bearing system |
NONLINEAR DYNAMICS |
2018,91（1）:655-677 |
SCI |
1区 |
3.313 |
2000 |
Wanhui Liu，Kai Feng，Peng Lyu |
独立完成(第一完成人) |
B1402S0059（刘万辉） |
26 |
Probability-interval hybrid uncertainty analysis for structures with both aleatory and epistemic uncertainties: a review |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
https://doi.org/10.1007/s00158-017-1864-4 |
SCI |
3区 |
2.894 |
1500 |
C. Jiang1 & J. Zheng1 & X. Han1 |
独立完成 |
B1402S0063（郑静） |
27 |
Shape optimization of automotive body frame using an improved genetic algorithm optimizer |
ADVANCES IN ENGINEERING SOFTWARE |
2018,121:235-249 |
SCI |
1区 |
2.539 |
1500 |
Qin Huan, Guo Yi, Liu Zijian,Liu Yu,Zhong Haolong |
独立完成(第一完成人) |
B1402S0068（秦欢） |
28 |
Reliability-based topology optimization for structures using fuzzy set model |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018，333:197-217 |
SCI |
2区 |
3.957 |
5000 |
Hui Yin, Dejie Yu, Baizhan Xia |
独立完成 |
B1402S0070（尹辉） |
29 |
Possibility-based robust design optimization for the structural-acoustic system with fuzzy parameters |
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
2018,102:329-345 |
SCI |
2区 |
4.874 |
2000 |
Hui Yin, Dejie Yu , Shengwen Yin, Baizhan Xia |
独立完成 |
B1402S0070（尹辉） |
30 |
Sensitivity and uncertainty analysis of interfacial effect in SHPB tests for concrete-like materials |
CONSTRUCTION AND BUILDING MATERIALS |
2018,163:414-427 |
SCI |
2区 |
3.703 |
2000 |
Ping Liu, Dean Hu, Qiankun Wu, Xuemei Liu |
非独立完成（第一完成人） |
B1202S006（刘平） |
31 |
Coupling of the 2D microtopography of tooth surface and transmission error |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
2018, 32 (2):723~730 |
SCI |
4区 |
1.182 |
1000 |
Changjiang Zhou, Zhonghua Wang,Siyu Chen |
非独立完成（第一完成人） |
B1402S0071（王中华） |
32 |
Study on AA5182 aluminum sheet formability using combined quasi-staticdynamic tensile processes |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2018，255：373-386 |
SCI |
2区 |
3.372 |
2000 |
Li, Guangyao，Deng, Huakun，Mao, Yunfei，Zhang, Xu，Cui, Junjia |
非独立完成（第一完成人） |
B1402Z0049（邓桦坤） |
33 |
Fatigue degradation after salt spray ageing of electromagnetically riveted joints for CFRP/Al hybrid structure |
MATERIALS & DESIGN |
2018, 142 :297–307 |
SCI |
2区 |
4.498 |
2000 |
Hao Jiang, Yanjun Cong, Xu Zhang, Guangyao Li, Junjia Cui |
非独立完成（第一完成人） |
B1402Z0052(蒋浩) |
34 |
Synthesis of TiN nanostructures by Mg-assisted nitriding TiO2 in N2 for lithium ion storage |
CHEMICAL ENGINEERING JOURNAL |
2018,336:12-19 |
SCI |
1区 |
6.159 |
2000 |
Shi, Huimin,Zhang, Hang,Chen, Zhi,Wang, Tao,Wang, Lei,Zeng, Wei,Zhang, Guanhua,Duan, Huigao |
非独立完成（第一完成人） |
B140700172（石惠民） |
35 |
Effect analysis on flow and boiling heat transfer performance of cooling water-jacket of bearing in the gasoline engine turbocharger |
APPLIED THERMAL ENGINEERING |
2018,130:754-766 |
SCI |
2区 |
3.684 |
2000 |
Jiaqiang E, Zhiqing Zhang, Zhengfang Tu, Wei Zuo, Wenyu Hu, Dandan Han, Yu Jin |
非独立完成（第一完成人） |
B150200091(张志清) |
36 |
Effects of fatty acid methyl esters proportion on combustion and emission characteristics of a biodiesel fueled marine diesel engine |
ENERGY CONVERSION AND MANAGEMENT |
2018,159:244-253 |
SCI |
1区 |
5.472 |
5000 |
Zhiqing Zhang, Jiaqiang E, Yuanwang Deng, MinhHieu Pham, Wei Zuo, Qingguo Peng, Zibin Yin |
非独立完成（第一完成人） |
B150200091(张志清) |
37 |
Correlation analysis of penetration based on keyhole and plasma plume in laser welding |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2018,256:1-12 |
SCI |
2区 |
3.372 |
2000 |
Yi Zhang, Fazhi Li, Zhichao Liang, Yeyong Ying, Qida Lin, Haiying Wei |
非独立完成（第一完成人） |
B150200092（李发智） |
38 |
Effect of beam profile on heat and mass transfer in filler powder laser welding |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2018,258:47-57 |
SCI |
2区 |
3.372 |
2000 |
Jiazhu Wu, Haiying Wei, Fengbo Yuan, Penghui Zhao, Yi Zhang |
非独立完成(第一完成人) |
B150200096（吴家柱） |
39 |
Fault feature analysis of cracked gear based on LOD and analytical-FE method |
MECHANICAL SYSTEMS AND SIGNAL PROCESSING |
2018,98:951-967 |
SCI |
2区 |
4.874 |
2000 |
Wu Jiateng, Yang Yu , Yang Xingkai, Cheng Junsheng |
独立完成 |
B150200098（吴家腾） |
40 |
A New Method for State of Charge Estimation of Lithium-Ion Batteries Using Square Root Cubature Kalman Filter |
ENERGIES |
2018,11 (1):209 |
SCI |
3区 |
2.707 |
1500 |
Xiangyu Cui , Zhu Jing, Maji Luo, Yazhou Guo, Huimin Qiao |
非独立完成(第一完成人) |
B150200100（崔相雨） |
41 |
A new double flexible job-shop scheduling problem integrating processing time, green production, and human factor indicators |
JOURNAL OF CLEANER PRODUCTION |
2018,174:560-576 |
SCI |
2区 |
6.207 |
2000 |
Guiliang Gong, Qianwang Deng, Xuran Gong, Wei Liu, Qinghua Ren |
独立完成 |
B150200104（龚桂良） |
42 |
Study on the piezoelectric coated devices based on the 2D Green’s functions under a tangential line force |
ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK |
2018,69(2):48 |
SCI |
2区 |
1.567 |
1000 |
Peng-Fei Hou, Yang Zhang |
非独立完成（第一完成人） |
B1502S0053（张阳） |
43 |
A new uncertainty propagation method for problems with parameterized probability-boxes |
RELIABILITY ENGINEERING & SYSTEM SAFETY |
2017,172: 64-73 |
SCI |
2区 |
3.461 |
2000 |
H.B. Liu, C. Jiang, X.Y. Jia, X.Y. Long, Z. Zhang, F.J. Guan |
非独立完成（第一完成人） |
B1502S0055(刘海波) |
44 |
Investigation on the effects of front-cavity on flame location and thermal performance of a cylindrical micro combustor |
APPLIED THERMAL ENGINEERING |
2018,130:541-551 |
SCI |
2区 |
3.684 |
2000 |
Qingguo Peng a,b,c, Jiaqiang E a,b,c,⇑, Zhiqing Zhang a,b, Wenyu Hu a,b, Xiaohuan Zhao a,b |
非独立完成（第一完成人） |
B1502S0059(彭庆国) |
45 |
Investigation on the effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor |
ENERGY CONVERSION AND MANAGEMENT |
2018,155:276-286 |
SCI |
1区 |
5.472 |
5000 |
Qingguo Peng, Jiaqiang E, Jingwei Chen, Wei Zuo, Xiaohuan Zhao, Zhiqing Zhang |
非独立完成（第一完成人） |
B1502S0059(彭庆国) |
46 |
The artificial tree (AT) algorithm |
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE |
2017, 65: 99-110 |
SCI |
2区 |
3.177 |
2000 |
Q.Q. Li , Kai Song , Z.C. He a, Eric Li b, A.G. Cheng a, Tao Chen a |
非独立完成(第一完成人) |
B1502S0061（李奇奇） |
47 |
Experimental study on the performance, combustion and emission characteristics of a high compression ratio heavy-duty spark-ignition engine fuelled with liquefied methane gas and hydrogen blend |
APPLIED THERMAL ENGINEERING |
2017,124:585-594 |
SCI |
2区 |
3.684 |
2000 |
Jingping Liu , Xiongbo Duan , Zhipeng Yuan , Qi Liu , Qijun Tang |
非独立完成（第一完成人） |
B1502S0066（段雄波） |
48 |
Microstructures and mechanical properties of the welded AA5182/HC340LA joint by magnetic pulse welding |
MATERIALS CHARACTERIZATION |
2018, 138: 229–237 |
SCI |
2区 |
2.761 |
1500 |
Huihui Geng, Zehua Xia, Xu Zhang, Guangyao Li, Junjia Cui |
非独立完成（第一完成人） |
B1502S0071（耿辉辉） |
49 |
Topology optimization of structure for dynamic properties considering hybrid uncertain parameters |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2018,57:625-638 |
SCI |
3区 |
2.894 |
1500 |
Z. C. He, Y. Wu,Eric Li |
非独立完成(第一完成人) |
B1502Z0049(伍毅) |
50 |
A novel squeeze-film air bearing with flexure pivot-tilting pads: Numerical analysis and measurement |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2017,134:1641-45 |
SCI |
2区 |
3.192 |
2000 |
Kai Feng, Minghui Shi, Tao Gong, Yuanyuan Liu, Jie Zhu |
非独立完成（第一完成人） |
B1502Z0051（石明辉） |
51 |
Fabrication of 3D SiOx structures using patterned PMMA sacrificial layer |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING |
2018,28(2) |
SCI |
2区 |
1.828 |
1000 |
Zhiqin Li, Quan Xiang, Mengjie Zheng, Kaixi Bi, Yiqin Chen, Keqiu Chen, Huigao Duan |
独立完成（第一完成人） |
B1507S0166（李志琴） |
52 |
Polarization-dependent scattering properties of single-crystalline silicon nanocylindroids |
OPTICAL MATERIALS EXPRESS |
2018,8(3):503-510 |
SCI |
2区 |
2.857 |
1500 |
Li, Zhiqin, Chen, Yiqin, Zhu, Xupeng, Zheng, Mengjie, Dong, Fengliang, Chen, Peipei,Xu, Lihua,Chu, Weiguo,Che, Keqiu,Duan, Huigao) |
非独立完成（第一完成人） |
B1507S0166（李志琴） |
53 |
Sensitive SERS detection at the single-particle level based on nanometer-separated mushroom-shaped plasmonic dimers |
NANOTECHNOLOGY |
2018,29(10) |
SCI |
2区 |
3.578 |
2000 |
Quan Xiang, Zhiqin Li, Mengjie Zheng, Qing Liu, Yiqin Chen, Lan Yang, Tian Jiang , Huigao Duan |
非独立完成（第一完成人） |
B1507S0167（向泉） |
54 |
Experimental and computational study on the effects of injection timing on thermodynamics, combustion and emission characteristics of a natural gas (NG)-diesel dual fuel engine at low speed and low load |
ENERGY CONVERSION AND MANAGEMENT |
2017, 203: 380-392 |
SCI |
1区 |
5.472 |
5000 |
Jianqin Fu, Jun Shu, Zhichao Zhao, Jingping Liu, Feng Zhou |
非独立完成（第一完成人） |
B160200087（舒俊） |
55 |
Crashworthiness of different composite tubes by experiments and simulations |
COMPOSITES PART B-ENGINEERING |
2018 ,143:86-95 |
SCI |
2区 |
4.644 |
2000 |
Zheyi Zhang , Wei Sun , Yongsheng Zhao , Shujuan Hou |
非独立完成（第一完成人） |
B160200093(张哲绎) |
56 |
Designing indices to measure surface roughness based on the color distribution statistical matrix (CDSM) |
TRIBOLOGY INTERNATIONAL |
2018,122:96-107 |
SCI |
2区 |
2.971 |
1500 |
Lu Enhui, Liu Jian, Gao Rongyu, Yi Huaian, Wang Weifang, Suo Xinyu |
独立完成 |
B160200097（路恩会） |
57 |
Active bump-type foil bearing with controllable mechanical preloads |
TRIBOLOGY INTERNATIONAL |
2018, 120: 187-202 |
SCI |
2区 |
2.971 |
1500 |
Kai Feng, Han-Qing Guan, Zi-Long Zhao Tian-Yu Liu |
独立完成（第一完成人） |
B160200108（关汗青） |
58 |
Sensitivity analysis of parametric errors on the performance of a torsion quasi-zero-stiffness vibration isolator |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2017, 134: 336-346 |
SCI |
2区 |
3.192 |
2000 |
Kai Wang, Jiaxi Zhou, Daolin Xu |
非独立完成(第一完成人) |
B1602S0057(王凯) |
59 |
Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys |
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY |
2018,34(2):349-354 |
SCI |
3区 |
2.764 |
1500 |
ZhipengWanga, Qihong Fanga,∗, Jia Li a, Bin Liub, Yong Liub,∗ |
非独立完成（第一完成人） |
B1602S0058（王志鹏） |
60 |
Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2018,257:191-202 |
SCI |
2区 |
3.372 |
2000 |
Liu, PW，Ji, YZ，Wang, Z，Qiu, CL，Antonysamy, AA，Chen, LQ，Cui, XY，Chen, L |
非立完成（第一完成人） |
B1602S0060（刘鹏伟） |
61 |
Observation of topological edge states of acoustic metamaterials at subwavelength scale |
JOURNAL OF PHYSICS D-APPLIED PHYSICS |
DOI: 10.1088/1361-6463/aab504 |
SCI |
2区 |
2.747 |
1500 |
Dai, Hongqing，Jiao, Junrui，Xia, Baizhan，Liu, Tingting，Zheng, Shengjie，Yu, Dejie |
独立完成 |
B1602S0065（代洪庆） |
62 |
Bending and vibration analyses of plate and shell using an element decomposition method |
ENGINEERING COMPUTATIONS |
2018, 35：268-286 |
SCI |
4区 |
1.37 |
1000 |
She Li, Xiangyang Cui, Gang Wang |
独立完成（第一完成人） |
B1602S0073（李射） |
63 |
How to control the crack to propagate along the specified path feasibly |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018,336:554-577 |
SCI |
2区 |
3.957 |
5000 |
Zhenxing Cheng, Hu Wang |
独立完成(第一完成人) |
B1602S0082（程振兴） |
64 |
A meshless-based local reanalysis method for structural analysis |
COMPUTERS & STRUCTURES |
2017,192:126-143 |
SCI |
2区 |
3.18 |
2000 |
Cheng, ZX Wang, H |
非独立完成（第一完成人） |
B1602S0082（程振兴） |
65 |
Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model |
APPLIED ENERGY |
2018,210:279–287 |
SCI |
1区 |
7.5 |
2000 |
Yuanwang Deng, Huawei Liu, Xiaohuan Zhao, Jiaqiang E, Jianmei Chen |
非独立完成（第一完成人） |
B170200101(赵晓欢) |
66 |
Dynamic response bound analysis for elastic beams under uncertain excitations |
JOURNAL OF SOUND AND VIBRATION |
2018,422:471-489 |
SCI |
2区 |
2.593 |
1500 |
JW Li,BY Ni,C Jiang,T Fang |
独立完成（第一完成人） |
B170200102（李金武） |
67 |
Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate |
APPLIED COMPOSITE MATERIALS |
2017, 25(1): 45-66. |
SCI |
4区 |
1.36 |
1000 |
Ren Yiru, Jiang Hongyong, Ji Wenyuan |
非独立完成（第一完成人） |
B170200111（蒋宏勇） |
68 |
Multi-scale finite element analysis for tension and ballistic penetration damage characterizations of 2D triaxially braided composite |
JOURNAL OF MATERIALS SCIENCE |
2018,53（14）: 10071-10094 |
SCI |
2区 |
2.522 |
1500 |
Jiang Hongyong，Ren Yiru，Zhang Songjun，Liu Zhihui，Nie, Lu |
非独立完成（第一完成人） |
B170200111（蒋宏勇） |
69 |
A numerical study on the energy-absorption of fibre metal laminate conical frusta under quasi-static compression loading |
THIN-WALLED STRUCTURES |
2018,124: 278-290 |
SCI |
3区 |
2.797 |
1500 |
Jiang Hongyong ,Ren Yiru,Xiang Jinwu |
非独立完成（第一完成人） |
B170200111（蒋宏勇） |
70 |
Experimental investigation of the quasi-static axial crushing behavior of filament-wound CFRP and aluminum/CFRP hybrid tubes |
COMPOSITE STRUCTURES |
2018,194:208-225 |
SCI |
1区 |
4.193 |
2000 |
Guangyong Sun, Zhen Wang, Jiaying Hong, Kai Song, Qing Li |
非独立完成（第一完成人） |
B170200118（王振） |
71 |
Topologically protected edge states for out-of-plane and in-plane bulk elastic waves |
JOURNAL OF PHYSICS-CONDENSED MATTER |
DOI: 10.1088/1361-648X/aab22a |
SCI |
2区 |
2.314 |
1500 |
Huo, Shao-Yong; Chen, Jiu-Jiu; Huang, Hong-Bo |
独立完成 |
B1702S0078（霍绍勇） |
72 |
Dispersion Error Analysis of Stable Node-Based Finite Element Method for the Helmholtz Equation |
COMMUNICATIONS IN COMPUTATIONAL PHYSICS |
2018,23（3）:795-821 |
SCI |
3区 |
2.121 |
1500 |
Hu, Xin，Cui, Xiangyang，Zhang, Qunyi，Wang, Gang，Li, Guangyao |
非独立完成（第一完成人） |
B1702S0085（胡鑫） |
73 |
Prediction of the tensile strength of hybrid polymer composites filled with spherical particles and short fibers |
COMPOSITE STRUCTURES |
2018,187 :509-517 |
SCI |
1区 |
4.193 |
2000 |
Hong-Liang Dai, Zheng-Wei Huang, Chao Mei, Zhong-Yan Lin |
独立完成（第一完成人） |
B1702Z0053 (黄郑维) |
74 |
An integrated generalized discriminant analysis method and chemical reaction support vector machine model (GDA-CRSVM) for bearing fault diagnosis |
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT |
2017,321-336 |
SCI |
4区 |
1.396 |
1000 |
V.H. Nguyen，J.S. Cheng，V.T Thai |
非独立完成（第一完成人） |
B7827323 护照（NGUYEN VIET HUNG） |
75 |
Effects of injection timing and injection peressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends |
ENERGY |
2018,149, 979-989 |
SCI |
1区 |
5.182 |
2000 |
Jiaqiang E, Minhhieu Pham, Yuanwang Deng, Tuannghia Nguyen, VinhNguyen Duy, DucHieu Le, Wei Zuo, Qingguo Peng, Zhiqing Zhang |
非独立完成（第一完成人） |
LB2015008（范明孝） |
76 |
Maximum actuation strain for dissipative dielectric elastomers with simultaneous effect of prestretch and temperature |
JOURNAL OF APPLIED POLYMER SCIENCE |
2018,135(8) |
SCI |
2区 |
1.727 |
1000 |
Deng, Lei, He, Zhicheng, Li, Eric, Chen, Shoue |
非独立完成（第一完成人） |
S130210070（邓磊） |
77 |
Numerical Analysis of the Morphological Characteristics of the Powder Stream in Laser Welding with Coaxial Filler Powder |
LASERS IN ENGINEERING |
2017,38(3-6)：225-245 |
SCI |
4区 |
0.257 |
500 |
Zhang, Y，Li, BS，Yang, X，Wei, HY |
非独立完成（第一完成人） |
S130210074（李邦帅） |
78 |
A multi-hierarchical successive optimization method for reduction of spring-back in autoclave forming |
COMPOSITE STRUCTURES |
2018,188: 143-158 |
SCI |
1区 |
4.193 |
2000 |
Hu Wang，Lei Chen, Fan Ye, Jian Wang |
非独立完成（第一完成人） |
S140200262（陈磊） |
79 |
Time dependent sheet metal forming optimization by using Gaussian process assisted firefly algorithm |
INTERNATIONAL JOURNAL OF MATERIAL FORMING |
2018,11:279–295 |
SCI |
4区 |
1.89 |
1000 |
Hu Wang，Lei Chen，Enying Li |
非独立完成（第一完成人） |
S140200262（陈磊） |
80 |
Characterization of nesting effects on compression processes for plain woven fabrics in composites manufacturing |
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES |
2017,36(20):1503-1513 |
SCI |
4区 |
1.369 |
1000 |
Xujing Yang, Yanke Wang, Fuhao Mo, Kai Wei, Shuyong Duan |
非独立完成(第一完成人 |
S140200265（王彦科） |
81 |
Band structure analysis of phononic crystals based on the Chebyshev interval method |
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA |
2017,142(5):3234-3244 |
SCI |
3区 |
1.85 |
1000 |
Lei Ji-Rong，Xie Long-Xiang，Liu, Jian |
独立完成 |
S1402W0258（雷济荣） |
82 |
Feedback Control of Grazing-Induced Chaos in theSingle-Degree-of-Freedom Impact Oscillator |
JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS |
DOI: 10.1115/1.4037924 |
SCI |
2区 |
1.773 |
1000 |
Yongkang Shen，Shan Yin，Guilin Wen Huidong Xu |
非独立完成（第一完成人） |
S150200199(申永康） |
83 |
Three dimensional carbon-bubble foams with hierarchical pores for ultra-long cycling life supercapacitors |
NANOTECHNOLOGY |
2018,29(27) |
SCI |
2区 |
3.578 |
2000 |
Bowen Wang, Weigang Zhang, Lei Wang, Jiake Wei, Xuedong Bai, Jingyue Liu, Guanhua Zhang, Huigao Duan |
非独立完成（第一完成人） |
S150200234（汪博文） |
84 |
Crashworthiness design for bio-inspired multi-cell tubes with quadrilateral, hexagonal and octagonal sections |
THIN-WALLED STRUCTURES |
2018,122（1），42-51 |
SCI |
3区 |
2.797 |
1500 |
Linwei Zhanga, Zhonghao Baia, Fanghua Bai |
非独立完成（第一完成人） |
S150200256（张林伟） |
85 |
Fractal labyrinthine acoustic metamaterial in planar lattices |
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES |
2018,132: 20-30 |
SCI |
2区 |
3.015 |
2000 |
Jian Liu, Liping Li, Baizhan Xia∗, Xianfeng Man |
独立完成 |
S150200281（李丽萍） |
86 |
Acoustic metamaterial with fractal coiling up space for sound blocking in a deep subwavelength scale |
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME |
DOI: 10.1115/1.4037514 |
SCI |
3区 |
1.848 |
1000 |
Baizhan Xia, Liping Li, Jian Liu, Dejie Yu |
独立完成 |
S150200281（李丽萍） |
87 |
The Influence of Neck Muscle Activation on Head and Neck Injuries of Occupants in Frontal Impacts |
APPLIED BIONICS AND BIOMECHANICS |
DOI: 10.1155/2018/7279302 |
SCI |
4区 |
0.846 |
500 |
Li, Fan, Lu, Ronggui,Hu, Wei,Li, Honggeng,Hu, Shiping,Hu, Jiangzhong,Wang, Haibin,Xie, He |
非独立完成(第一完成人) |
S150200293（鲁荣贵） |
88 |
Optimal acquisition and remanufacturing policies considering the effect of quality uncertainty on carbon emissions |
JOURNAL OF CLEANER PRODUCTION |
2018,186: 180-190 |
SCI |
2区 |
6.207 |
2000 |
Zhou, Juan; Deng, Qianwang; Li, Tong |
独立完成 |
S150200308周娟 |
89 |
A 3D space coiling metamaterial with isotropic negative acoustic properties |
APPLIED PHYSICS LETTERS |
DOI: 10.1063/1.5005553 |
SCI |
2区 |
3.341 |
2000 |
XF Fu, GY Li, MH Lu, G Lu, X Huang |
非独立完成（第一完成人） |
S150200344（傅显飞） |
90 |
Wetting Models and Working Mechanisms of Typical Surfaces Existing in Nature and Their Application on Superhydrophobic Surfaces: A Review |
ADVANCED MATERIALS INTERFACES |
DOI: 10.1002/admi.201701052 |
SCI |
2区 |
4.302 |
2000 |
Jiaqiang E, Yu Jin, Yuanwang Deng, Wei Zuo, Xiaohuan Zhao, Dandan Han, Qingguo Peng, and Zhiqing Zhang |
非独立完成（第一完成人） |
S150200366(金钰) |
91 |
CFD studies on effects of SCR mixers on the performance of urea conversion and mixing of the reducing agent |
CHEMICAL ENGINEERING AND PROCESSING |
2018,123:82-88 |
SCI |
3区 |
2.579 |
1500 |
Tan, LG; Feng, PF; Yang, SB; Guo, YG; Liu, SC ; Li, ZW |
非独立完成（第一完成人） |
S150200370(冯鹏飞) |
92 |
Experimental research on the dynamic behaviors of the keyhole and molten pool in laser deep-penetration welding |
JOURNAL OF PHYSICS D-APPLIED PHYSICS |
DOI: 10.1088/1361-6463/aab2cb |
SCI |
2区 |
2.747 |
1500 |
Yi Zhang, Qida Lin, Xuni Yin, Simeng Li, Jiquan Deng |
非独立完成(第一完成人) |
S1502W0131（林奇达） |
93 |
Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system |
APPLIED THERMAL ENGINEERING |
2018,132 :508-520 |
SCI |
2区 |
3.684 |
2000 |
Jiaqiang E, Dandan Han, An Qiu, Hao Zhu, Yuanwang Deng, Jingwei Chen, Xiaohuan Zhao, Wei Zuo, Hongcai Wang, Jianmei Chen, Qingguo Peng |
非独立完成（第一完成人） |
S1502W0159(韩丹丹) |
94 |
Performance enhancement of a baffle-cut heat exchanger of exhaust gas recirculation |
APPLIED THERMAL ENGINEERING |
2018, 134:86–94 |
SCI |
2区 |
3.684 |
2000 |
Jiaqiang E, Dandan Han, Yuanwang Deng, Wei Zuo, Cheng Qian, Gang Wu, Qingguo Peng, Zhiqing Zhang |
非独立完成（第一完成人） |
S1502W0159(韩丹丹) |
95 |
Robust lane detection and tracking using multiple visual cues under stochastic lane shape |
JOURNAL OF ELECTRONIC IMAGING |
doi: 10.1117/1.JEI.27.2.023025 |
SCI |
4区 |
0.754 |
500 |
Zhi Huang,Bao zheng Fan,Xiaolin Song |
非独立完成（第一完成人） |
S1502W0167(范宝正) |
96 |
Investigation of the effect of neck muscle active force on whiplash injury of the cervical spine |
APPLIED BIONICS AND BIOMECHANICS |
DOI: 10.1155/2018/4542750 |
SCI |
4区 |
0.846 |
500 |
Yan, Yu，Huang, Jing，Li, Fan，Hu, Lin |
非独立完成（第一完成人） |
S1502W0175（燕宇） |
97 |
Comprehensive global optimization of an implicit constrained multiphysics system for electric vehicles with in-wheel motors |
ENERGY |
2018,139:523-534 |
SCI |
1区 |
5.182 |
2000 |
Fei Lei, Ke Gu, Bin Du, Xiaoping Xie |
非独立完成(第一完成人) |
S1502W0232（顾可） |
98 |
A progressive intraply material deterioration and delamination based failure model for the crashworthiness of fabric composite corrugated beam: Parameter sensitivity analysis |
COMPOSITES PART B-ENGINEERING |
2018,135: 49-71 |
SCI |
2区 |
4.644 |
2000 |
Ren, YR; Jiang, HY; Gao, BH; Xiang, JW |
非独立完成(第一完成人) |
B170200111(蒋宏勇) |
99 |
A computational investigation of thermal effect on lithium dendrite growth |
ENERGY CONVERSION AND MANAGEMENT |
2018,161:193-204 |
SCI |
1区 |
5.472 |
5000 |
H.H. Yan, Y.H. Bie, X.Y. Cui, G.P. Xiong, L. Chen |
非独立完成（第一完成人） |
S160200205（闫航航） |
100 |
Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements |
APPLIED BIONICS AND BIOMECHANICS |
DOI: 10.1155/2018/9293454 |
SCI |
4区 |
0.846 |
500 |
Fuhao Mo, Siqi Zhao, Chuanhui Yu,Zhi Xiao |
非独立完成(第一完成人) |
S160200224（赵思琦） |
101 |
A coupling approach of state-based peridynamics with node-based smoothed finite element method |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2018,331:675-700 |
SCI |
2区 |
3.957 |
5000 |
Bie, YH，Cui, XY，Li, ZC |
非独立完成（第一完成人） |
S160200255（别业辉） |
102 |
Subwavelength topological valley-spin states in the space-coiling acoustic metamaterials |
ACTA PHYSICA SINICA |
DOI: 10.7498/aps.66.228101 |
SCI |
4区 |
0.462 |
500 |
Zheng Sheng-Jie Xia Bai-Zhan Liu Ting-Ting Yu De-Jie |
独立完成 |
S160200271（郑圣洁） |
103 |
Observation of valleylike edge states of sound at a momentum away from the high-symmetry points |
PHYSICAL REVIEW B |
2018,97(15) |
SCI |
2区 |
3.711 |
2000 |
Bai-Zhan Xia, Sheng-Jie Zheng, Ting-Ting Liu, Jun-Rui Jiao, Ning Chen, Hong-Qing Dai, De-Jie Yu, and Jian Liu |
独立完成 |
S160200271（郑圣洁） |
104 |
Influence of thickness of composite layers on failure behaviors of carbon fiber reinforced plastics/aluminum alloy electromagnetic riveted lap joints under high-speed loading |
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING |
2018,115:1-9 |
SCI |
2区 |
3.098 |
2000 |
Junjia Cui, Dongying Dong, Xu Zhang, Xiaodong Huang, Guoxing Lu, Hao Jiang, Guangyao Li |
非独立完成（第一完成人） |
S160200276（董东营） |
105 |
Strength and Failure Mechanism of Composite-Steel Adhesive Bond Single Lap Joints |
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING |
DOI: 10.1155/2018/5810180 |
SCI |
4区 |
1.396 |
1000 |
Wei, Kai，Chen, Yiwei，Li, Maojun，Yang, Xujing |
独立完成 |
S160200294（陈意伟） |
106 |
Structural and thermal analysis of integrated thermal protection systems with C/SiC composite cellular core sandwich panels |
APPLIED THERMAL ENGINEERING |
2018,131:209-220 |
SCI |
2区 |
3.684 |
2000 |
Kai Wei , Kaiyu Wang , Xiangmeng Cheng , Yong Peng , Maojun Li , Xujing Yang |
非独立完成（第一完成人） |
S160200301（王开禹） |
107 |
Thermodynamic process and performance of high n-butanol/gasoline blends fired in a GDI production engine running wide-open throttle (WOT) |
ENERGY CONVERSION AND MANAGEMENT |
2017,152:57-64 |
SCI |
1区 |
5.472 |
5000 |
Zheng Chen, Yanqun Zhang, Xiaotai Wei, Quanchang Zhang , Zhenkuo Wu, Jingping Liu |
非独立完成（第一完成人） |
S160200372（张艳群） |
108 |
Meso-Scale Progressive Damage Behavior Characterization of Triaxial Braided Composites under Quasi-Static Tensile Load |
APPLIED COMPOSITE MATERIALS |
2017,25(2):335-352 |
SCI |
4区 |
1.36 |
1000 |
Y Ren，S Zhang，H Jiang，J Xiang |
非独立完成（第一完成人） |
S1602W0109（张松俊） |
109 |
Study on fibre laser machining quality of plain woven CFRP laminates |
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING |
2018,124(3): 270 |
SCI |
3区 |
1.522 |
1000 |
Maojun Li, Shuo Li, Xujing Yang, Yi Zhang, Zhichao Liang |
独立完成(第一完成人) |
S1602W0118（李硕） |
110 |
Fast sensitivity reanalysis methods assisted by Independent Coefficients and Indirect Factorization Updating strategies |
ADVANCES IN ENGINEERING SOFTWARE |
2018,119: 93-102 |
SCI |
3区 |
2.539 |
1500 |
Liu Juanjuan, Wang Hu |
独立完成(第一完成人) |
S1602W0175(刘娟娟) |
111 |
In-plane crashworthiness of bio-inspired hierarchical honeycombs |
COMPOSITE STRUCTURES |
2018,192, 516-527 |
SCI |
2区 |
4.193 |
2000 |
Yin, HF (Yin, Hanfeng) ; Huang, XF (Huang, Xiaofei) ; Scarpa, F (Scarpa, Fabrizio) ; Wen, GL (Wen, Guilin) ; Chen, YY (Chen, Yanyu) ; Zhang, C (Zhang, Chao) |
非立完成（第一完成人） |
S1602W0181（黄小非） |
112 |
Three dimensional lightweight lattice structures with large positive, zero and negative thermal expansion |
COMPOSITE STRUCTURES |
2018,188: 287-296 |
SCI |
2区 |
4.193 |
2000 |
Kai Wei, Yong Peng, Kaiyu Wang, Shengyu Duan, Xujing Yang, Weibin Wen |
非独立完成（第一完成人） |
S1602W0224(彭勇) |
113 |
Analysis of End-of-Life Vehicle Recycling Based on Theory of Planned Behavior |
ENVIRONMENTAL ENGINEERING SCIENCE |
2017,3（9）:627-637 |
SCI |
4区 |
1.504 |
1000 |
Qianwang Deng, Xun Li,* Yuanrui Wang, and Weiming Li |
独立完成 |
S1602W0256（刘俊武-委托） |
114 |
A memetic algorithm for multi-objective flexible job-shop problem with worker flexibility |
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH |
2018,56（7）：2506-2522 |
SCI |
2区 |
2.388 |
1500 |
XR Gong，QW Deng，GL Gong，W Liu, QH Ren |
独立完成 |
S150200272（公旭冉） |
115 |
Non-Newtonian thermal elastohydrodynamic lubrication in point contact for a crowned herringbone gear drive |
Tribology International |
2017,116 : 470-481 |
SCI |
3区 |
2.903 |
1500 |
|
非独立完成（第一完成人） |
S1502W0186（潘利君） |
116 |
An enhanced flexible dynamic model and experimental verification for a valve train with clearance and multi-directional deformations |
Journal of Sound and Vibration |
2017,410:249-268 |
SCI |
3区 |
2.593 |
1500 |
Changjiang Zhou, Bo Hu , Siyu Chen, Liping He |
非独立完成（第一完成人） |
B150200087(胡波) |
117 |
Multi-physics analysis of electromagnetic forming process using an edge-based smoothed finite element method |
International Journal of Mechanical Sciences |
2017,134: 244-252 |
SCI |
1区 |
3.192 |
2000 |
Li, She, Cui, Xiangyang,Li, Guangyao |
非独立完成（第一完成人） |
B1602S0073(李射) |
118 |
An environmental benefits and costs assessment model for remanufacturing process under quality uncertainty |
JOURNAL OF CLEANER PRODUCTION |
2018,178:45-58 |
SCI |
1区 |
6.207 |
2000 |
Liao, Haolan, Deng, Qianwang,Wang, Yuanrui,Guo, Shumin,Ren, Qinghua |
独立完成 |
B140200094(廖浩岚) |
119 |
A Study of the Effect of the Front-End Styling of Sport Utility Vehicles on Pedestrian Head Injuries |
APPLIED BIONICS AND BIOMECHANICS |
DOI: 10.1155/2018/8502507 |
SCI |
4区 |
0.846 |
500 |
Zhang Guanjun,QinQin, Chen Zheng, Bai Zhonghao, Cao, Libo |
独立完成 |
S1402W0156(秦勤) |
120 |
Numerical investigations on different configurations of a four-channel meso-scale planar combustor fueled by hydrogen/air mixture |
Energy Conversion and Management |
2018,160:1-13 |
SCI |
1区 |
5.589 |
5000 |
Wei Zuo, Jiaqiang E, Rongming Lin, Yu Jin, Dandan Han |
非独立完成（第一完成人） |
B1402S0055 (左威) |
121 |
Experimental study on combustion and emission characteristics of turbocharged gasoline direct injection (GDI) engine under cold start new European driving cycle (NEDC) |
Fuel |
2018,215: 272-284 |
SCI |
2区 |
4.726 |
2000 |
Guohui Zhu, Jingping Liu, Jianqin Fu, Zhengxin Xu, Qiyi Guo, He Zhao |
非独立完成（第一完成人） |
B1302H0038（朱国辉） |
122 |
Effect of trace Sr and Sc contents and ultrasonic vibration on the microstructure and mechanical properties of the A380 alloy |
ADVANCES IN MECHANICAL ENGINEERING |
2018，10（5） |
SCI |
4区 |
0.946 |
500 |
Jiping Lei, Jianwu Yu, Jianmei Chen, Chengbo Li, Hong Luo1 and Zifu Li |
非独立完成（第一完成人） |
B130200053雷吉平 |
123 |
Discussions onnon-probabilistic convex modelling for uncertain problems |
Applied Mathematical Modelling |
2018,59:54-85 |
SCI |
1区 |
2.768 |
1500 |
B.Y. Ni , C. Jiang a ,∗, Z.L. Huang b |
非独立完成（第一完成人） |
B1302S0025（倪冰雨） |
124 |
Lightweight composite lattice cylindrical shells with novel character of tailorable thermal expansion |
International Journal of Mechanical Science |
2018, 137: 77-85 |
SCI |
2区 |
3.192 |
2000 |
Kai Wei, Yong Peng, Zhaoliang Qu, Hao Zhou, Yongmao Pei, Daining Fang |
非独立完成(第一完成人) |
S1602W0224（彭勇） |
125 |
Viscoelastic Modeling of Responses in the Whole Compaction Process for Woven Fiber Reinforcements |
International Journal of Applied Mechanics |
2018, 2 |
SCI |
3区 |
1.913 |
1000 |
Kai Wei, Yanke Wang, Xujing Yang |
独立完成(第一完成人) |
S140200265(王彦科) |
合计 |
|
|
|
|
|
|
235500 |
|
|
|
